[Translate]

---

Office buildings are significant energy consumers using an average of 17 kWh of electricity and 32 cubic feet of gas per square foot. Moreover, industry data indicates that energy costs are 20% of the typical facility’s annual operating budget.

As energy costs continue to increase, businesses are discovering the tremendous financial, operational and competitive value of energy cost reduction and improved energy efficiency.

Because HVAC and lighting comprise 65% of combined energy use in office buildings (47% and 18% respectively), they are where you should initially focus your energy reduction efforts. By centering on these key areas, companies have significantly improved energy efficiency while maintaining or improving occupant / employee comfort and productivity.

Because each facility is relatively unique, using a carefully planned “whole facility” approach, allows you to be confident that you are making the best, most financially and operationally prudent energy efficiency choices. You will find there are proven and recommended engineering approaches and technologies available that can guarantee results and by working with an experienced, energy services company or engineering firm, choosing the right options does not need to be complicated. Deciding where and how to begin can be fairly straightforward. The best first step is always to focus on quick, low cost or no cost solutions. This can include training staff to turn lights off when they leave unoccupied rooms, using occupancy sensors in offices, conference rooms, etc., using sleep mode settings for computers and other electronics when not in use, setting back thermostats during overnight and closed hours and having the HVAC systems serviced and cleaned on a regular basis. After you’ve addressed the “low hanging fruit”, next steps can involve choosing from a variety of longer term options that are designed to deliver much greater energy savings. Options should be considered based on their proven track record of success, whether they are “approved” or “recommended” by organizations such as Energy Star, US DOE, USGBC, IEEE, etc., their cost effectiveness and return on investment as well as their consistency with your company’s goals and culture. Some of the best options for office buildings include lighting upgrades to high efficiency fluorescent, CFL and/ or LED, use of occupancy sensors and day-lighting opportunities, sine wave modification for outdoor lighting circuits, liquid pressure amplification for central chiller plants, anti-compressor short cycling for roof top units, use of variable frequency drives, building management systems, reflective roof coatings and possibly equipment replacement for older equipment that is approaching the end of its useful life.

As you proceed with implementing energy efficiency measures, know that you don’t have to do it alone. There are experienced firms that can help make recommendations and provide turnkey services for you. In choosing a partner to guide this type of “whole facility” approach for you, it is important to look at a number of factors. You may want to ask the following: What is their level of experience using these various technologies, do they use proven and recommended approaches, what are the credentials of their staff, are they members of key industry organizations, what is their level of knowledge of your industry, do they offer a free initial evaluation and do they offer guarantees at each step of the process. Remember, the sooner you begin, the sooner you start saving your organization’s valuable and limited resources and improving your company’s profitability!

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

[Translate]

---

There are several rankings and benchmarks for corporate energy efficiency and corporations can perform an energy audit to see where they can improve with their energy usage. Corporations should look into how many kilowatts they use per square foot and how much gas or BTUs are used per square foot. Each country will have average values and recommended values for being efficient.

If you are looking to improve your company’s energy usage you can look into the different products available as each vendor will have information about its products’ energy consumption. For example, glass companies will provide information on their products’ solar heat gain and U-value, and so on.

Many more corporations are creating positions that deal specifically with energy management and many times there is compensation or benefits for those corporations that have good energy performance. There are several different ways in which corporations can make changes to their energy usage and ultimately enjoy big energy savings.

You want to make sure that your building is properly maintained as this keeps it running as efficiently as possible. Small changes can actually cause big changes in energy consumption. One such example is not running the air conditioning at night if no one is in the building. Also you can go through a retro-commissioning process to get your building back to its original state.

Steam systems are frequently an issue with energy usage as they are not maintained well. Steam traps tend to be used to deal with condensation but these can easily become stuck open and transfer the steam back into the boiler. This wastes a lot of heat as the steam goes back into the system and does not heat the building. You need to make sure these are replaced regularly and maintained well.

You also want to optimize your HVAC systems and these can account for 20 percent or more of all energy used in a building. And lastly, you might want to look into thermal energy storage or heat recovery options.

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

[Translate]

---

Everyone these days is taking a second glance at their utility bills and starting to consider alternative options to lower them. Companies are trying to find ways to cut costs without cutting their staff, benefits, or pay packages. Energy bills have been rapidly increasing and causing even large companies to start thinking of ways to reduce them. If you are trying to save on your company electric bill, here are a few ideas to consider:

A typical building will use most of its energy for heating and cooling purposes. This usually accounts for about 45% of your bill. Since this is the biggest controlling factor, it is a good place to start.

If you can not afford a large scale building management system, try programmable thermostats. Programmable thermostats have been noted to save users up to 30% on their heating and cooling costs. These little devices allow you to program its setting to automatically adjust the temperature at certain times during the day and also when the outside temperature changes. To get the most bang for your buck, look for the Energy Star label on thermostats.

During the summer, you can make use of fans to keep the air flowing. This will make the room feel cooler and allow you to keep the thermostat at a slightly higher setting. Every degree you can keep the temperature setting higher in the summer and lower in the winter will add up to significant savings.

Lighting is another huge chunk of your energy bills, particularly in large business that use a lot of lights or offer 24 hour service. While CFL or LED bulbs are initially much higher in cost than traditional bulbs, they will last up to ten times longer and use 75% less energy! In the end, you will be more than getting your money back out of these light bulbs.

If you are serious about reducing your energy costs, you will need to reach for higher hanging fruit and you should hire a professional energy auditor or engineering firm. Your utility company may even provide a high level energy audit for no initial cost. An auditor or engineer will do a thorough inspection of your entire business and find ways to shrink your utility bills by eliminating unnecessary energy usage and waste. This could prove to be one of the most valuable steps you ever take to reducing your energy costs.

The energy cost center is the easiest to positively impact on any company’s P&L. So get started today!

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

[Translate]

---

Many businesses have implemented energy efficiency measures in their facilities over the past several years to help decrease operating expenses and aid the local and global environment. What a lot of these companies do not know is that sizeable federal tax deductions are available to them and also that time may be running out.

The Energy Policy Act of 2005 (EPAct 2005) provides generous, immediate tax deductions to businesses for making energy efficiency improvements to their buildings. The federal tax incentives center mainly on efficiency improvements to lighting, HVAC and building envelopes and can be as large as $1.80 per square foot.

The Emergency Economic Stabilization Act of 2008 extended Section 179D and EPAct 2005 so the act will not expire until December 31, 2013. However, that does not mean that time may not be running out for some companies.

For businesses that implemented energy efficiency projects in 2006 it is probable they filed their tax returns before April 15, 2007. If they were unaware of the deductions at that time, they are now at risk of losing those tax deductions forever since the IRS only allows a three year period to amend tax returns.

That means if you have not yet amended your 2006 tax return you have only a few months left to do so!

As an electrical contractor working with commercial and industrial customers you certainly have been thinking about ways to increase your sales and likely how to better utilize your current book of business to that end. You have also most likely been approached by your current customers asking what they can do to reduce their energy costs.

Have you thought about a strategic partnership with an experienced engineering firm that specializes solely in turnkey, energy cost reduction projects on a national level? One that can bring whole facility energy solutions to the table for you and your customers? A company that can provide a fast payback and increase cash flow for your customer?

Bringing in such a company will grow your business as you will be the one who is sub-contracted by the engineering firm to provide the installation services under their management and direction. You can use this approach over and over again with all of your customers and doing so will not only increase your revenues exponentially, it will also transform your customers’ impression of you from simply another vendor to that of a valued consultant.

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

[Translate]

---

If you want to stay on top of what is happening in the world then you need a computer. It makes no sense, though, to spend more than you have to on a product that will become obsolete within a few months. Save your money and find cheap laptops at these places online.

Auction sites, like Ebay, are a great place to shop for a laptop. With thousands of sellers offering a full range of configurations, you’ll be able to find the computer you want in the price range you need. And because buyer satisfaction is a priority with these sites, almost all of them offer some type of fraud protection for the buyer that will help you avoid being taken advantage of.

Inexpensive laptops can be found at internet classified sites like Craigslist. Because listing on these sites is usually free, you get a lot of people using them to unload merchandise which means a good selection for you to choose from. But beware, you are dealing with a private seller so do what you can to protect yourself from fraud.

You can find good deals on brand name laptops at surplus stores like Overstock.com. Manufacturers will often sell their surplus products to these types of stores in an effort to recover some of the cost of overproduction which these stores sell to you at a discount. Defective products can usually be returned easily and since you’ll be using your credit card to buy, you’ll have the added advantage of fraud protection services offered by your credit card company.

A good place to look online for a deal on a laptop are social networks and forums where technophiles hang out. People who are into technology like computers are forever purchasing the next new thing and will sell their old systems to pay for their addiction. Scour the ad sections of these sites to see if anyone is selling the laptop you want. Be aware, though, that you are dealing directly with a person so take the necessary precautions to protect yourself.

To get you in the door, so to speak, manufacturers will sometimes offer a special deal on a laptop. You can find these deal mostly around the Thanksgiving and Christmas holidays. However, if you are internet savvy, you can find rebates and coupons online which you can use to bring down the cost of the laptop you want.

Finding cheap laptops online is easy. Make an effort to look in all the right places and you’ll find exactly what you need at the price you want to pay.

Andrew Johnson is an expert in computer consumables. If you want more information about types of cheap laptops or are looking for a reputable computer retailer please visit http://www.ebuyer.com